CORPORATE OFFICES: 2744 EOFF STREET, PO BOX 6650, WHEELING WV 26003

                          TELEPHONE: 304-233-3000   FAX: 304-233-9666

                    Home Up Feedback Search

                         COMPLETE COMMUNICATIONS SYSTEMS FOR YOUR BUSINESS

 

 

Locations & Press Releases
Telephone Systems
Cabling & Maintenance
Network Equipment
IP/Wired Cameras
Accessories
Time Change Directions
User Guides

NORTEL NETWORKS - ALL

After you enter programming mode, all methods are pretty much the same.

Access type 1:   Press  * * TIME (8463)

Access type 2:   Press  * * ADMIN (23646)

System displays Password & enter 23646

Display shows 1.Sys speed dial

Press Next Display shows 2. Names

Press Next Display shows 3. Time and date

Press Show Display shows Time 16:24

On the Softkey under the display it says CHANGE

If you wish to change the time, press CHANGE, if not press NEXT

Once you pressed the CHANGE button the hour displays;

If you wish to change the hour, press CHANGE, if not press NEXT

Once you pressed the CHANGE button the hour is erased allowing you to enter the new time - enter the new hour in
24 hour format, when OK press NEXT

Once you pressed the NEXT button the minutes display;

If you wish to change the minutes, press CHANGE, if not press NEXT

Once you pressed the CHANGE button the minutes are erased allowing you to enter the new time - enter the new minutes,
when OK press NEXT

Follow the same procedure for changing the date

 

Norstar Startalk - Adjust Time and Date
* Note Norstar Voice Mail R. 4 sets its time automatically from the telephone system
 

1 Press Feature 984
2 Enter the system administrator mailbox and password combination
3 Press OK
4 Press Change
5 Enter < the year, month, and day > NOTE: this is a six digit field. Any single digit month or day must be preceded by a zero. For example February 7, 1991 must be entered as 910207.
6 Press Next The display changes to show the time
7 Press CHNG The display shows Enter hhmm:
8 Enter the < the time in hours and minutes>Note: This is a 4 digit field. Any single digit hour or minute must have a zero preceeding the number. For example, 2:03 must be entered as 0203.
9 Press AM or PM
10  To end the session press Rls
 

 

Send mail to acccentral@acccentral.com with questions or comments about this web site.
Copyright © 2011 Advanced Communications Company
Last modified: 02/02/11